Custom Knives:

Production Knives:

Flashlights:

Shop by keyword or maker:

Item # 6546 Trident OB-02 Phantom Fighter w/Ext Pommel, Ridged, NIB Inbound
	This is the first introduction of the Phantom Fighter built on the OB-02 frame with an angled pommel for CQC blunt trauma strikes. The finish is both camoflauged and functional as one of the toughest finishes in the Trident line of knives. Built for HD use and non stain blade, spear point swedged. Please note that this is not a base model. It has an extended pommel, hand filed ridges and swedged blade. This is the Phantom Fighter, not a standard OB-02. OAL: 9.,5" w/ Pommel Blade: 5.0" Handle: G-10 3.9" Pommel: Angled .75" w/ Lanyard hole Handel w/ Pommel: 4.5" Blade Material: S30V/CF2 Construction: Full tang length S30V stainless steel Also featured are the rear ridges cut into the handle and tang for superior gripping with wet or slippery hands. The blade features a perfectly ground swedge for ease of penetration and a half moon cutout for the index finger when precison cutting is needed. Lifetime Warranty included with usual disclaimers for intentional destruction and abuse. Certificate of Authenticity included, signed by Trident. Inbound orders accepted for delivery.
	$999,999.99 0 available	Out of Stock
Item # 6544 Trident OB-02 Phantom, NIB SOLD
	This is the standard OB-02 without the extended pommel or swedged double edge blade. The handle is G-10 and is rippled for a strong gripping surface.The construction is full tang S30V steel with a Kydex sheath handmade and fitted to each knife individually. There is a standard Lanyard loop hole in all Trident fixed blade knives. This example is a spear point which is not standard, the drop drop point is standard. Blade Material: CPM S30V Blade Thickness: 0.250" Blade Length: 4.25"-4.75" Total Length: 9.25 Sheath: Custom Made Kydex with Teklock Please add 35.00 for the double edged blade in the spear point configuration. Orders accepted for inbound deliveries.
	$999,999.99 0 available	Out of Stock
Item # 6543 Microtech HALO II Tactical Black 2 Tone, NIB SOLD
	This is a hard to find, brand new in the box, HALO that has a full size Molle Tactical sheath and two tone Tactical blade. This Microtech Tactical HALO is NIB with a black two tone drop point plain edge blade and Tactical full size Molle nylon sheath, that slo has a belt loop opening. The knife has no serial number on the handle, but the retraction bar has Microtech wording. The box label reads "HALO II BLACK TACTICAL PLAIN." It's ambidextrous, one handed, fast action open, and has fired its way into the hands of thousands of military, law enforcement and government agents all over the world. Smooth lines, lightweight, and a deadly edge, provide you with a little more than just backup. H.A.L.O II Two Tone TACTICAL AUTOMATIC OPENING - OUT THE FRONT - PLUNGE LOCK ACTION: CONTINUOUS PROPULSION COMPRESSION SPRING BLADE: S30-V, .148” THICK, RC 58-59 BLADE LENGTH: 4.00” OVERALL LENGTH: 9.400” LENGTH CLOSED: 5.370” HANDLE: 6061-T6 ALUMINUM MIL-SPEC CLEAR HARD COAT ANODIZE HANDLE THICKNESS: .420” WEIGHT: 4.5 OZ APPROXIMATELY. In stock, available for immediate delivery.
	$999,999.99 0 available	Out of Stock
Item # 6542 Ray Rantanen Railroad Spike Knife w/ Sheath, NIB (A)
	This knife is made from a medium sized Railroad Spike. Thade shpe is a straight point measuring 3 inches. The handle has a twist in it to facilitate a good grip and also features finger notches on the top rear of the blade for controlled cutting. The overall length is 6-3/8". The entire knife is handmade from scratch, including the hand sewn and dyed with professional oil based leather dye for the sheath color. This blacksmith, master Guild Member and sheath maker never ceases to amaze me with the low prices for extremely high quality pieces, including this RR spike knife made from absolute scratch.
	$999,999.99 0 available	Out of Stock
Item # 6541 Mudbone Jones Scagel Farrier Dagger, NIB (A)
	Mudbone Knives Are Scagel Inspired: NOT SCAGEL COPIES Scagel Knives Were Convex Ground Mudbone Knives are forged to shape & flat filed triple quenched & double drawn. Entirely Hand Finished. Treated with warm Epoxy to make the stacked leather Handles water resistant. All Sheaths/Holsters are made of 8 ounce Oak Tan Leather. The sheath is Hand Made Alligator Inlayed hand tooled leather with a hand stamped border, hand punched and Hand Sewn The Hilts are drilled then "Try Filed" until driver bar can force a tight fit against the Riccasso. All Knives are Silver Soldered from the back side of the Hilt until only a thin line of solder appears around the blade. Mudbone is the only Knife Maker that I know of who doesn't use Power Tools. Including his Coal Fueled Forge. The blade length is 6” inches of L6 Tool Steel Nickel Alloy Blade .18” thick. Made from a Farrier’s Rasp (Antique Horse Shoe File)the handle is Antler with brown leather wrap cord. Length is 4.5" and the guard is brass, making the OAL 10.75 inches.
	$999,999.99 0 available	Out of Stock
Item # 6540 JDG Persian Fighter, High Polished w/ Sheath NIB (A)
	This is a beautiful knife that will serve as a fighter as well as a field knife. The knife features a full tang hi polished stainless blade with a pinned handle of Zebra wood. The blade is a pointed upswept design and is a one of a kind. The length is 4" of sharpened cutting edge. Handle length is 4" for an OAL of almost 8" with finger grooves that allow for a great one hand hold that is comfortable and non slip. The ergonomic design of this knife to the hand is impeccable. The sheath is leather with a snap for retention and is custom fitted to the knife.
	$999,999.99 0 available	Out of Stock
Item # 6539 JDG Stag Hunter w/ Sheath, NIB (A)
	This is a stainless and Stag handled double edged hiunting blade. The blade is mirror polished and features a gut hook as well. Blade Length is 6.75" approx. and the handle is 4.25" of stag and the handle of stainless steel with the pommel and the double guard measurement is 5.5". The OAL is 13", tip to toe. The leather sheath is hand stitched and fitted for this kniofe. A snap is used for retention secuirely of the knife when sheathed. From the design of the knife to the design of the sheath, all is handmade. This is a one of one knife.
	$999,999.99 0 available	Out of Stock
Item # 6536 Stan Wilson Damascus & Black Lip Pearl Neck Knife , NIB (A)
	All Wilson's knives are made by hand free form and free hand ground plus all hand finished. "This takes a little more time but it also allows me to be more creative and have full control to make slight changes to each custom knife, obviously as result no two knives are ever identical." This neck knife is: Devin Thomas Reptilian Damascus Blade size: 3 1/2" cutting edge Handle: Black Lip Pearl Scales Overall: 6 1/4" Sheath: Double Wrapped Kydex Neck Sheath with waxed leather Damascus & Black Lip Pearl Neck Knife has already been featured in the December 2006 issue of Knives Illustrated.
	$999,999.99 0 available	Out of Stock
Item # 6535 Kansei Mitsuno FB Lether Pouch Snap Knife, NIB (A) SOLD
	This is a very innovative knife, carried much like a "pocket holster" for a gun that hides the outline of the holster. The knife is built with a snap in the handle to attach the knife to the sheath and the becomes wallet sized for concealed carry. You may pull the wallet out and the mugger thinks yo are handing him a wallet. Very innovative. The rings are gold and the snap is brass. Blade Material: S30V Handle Material: S30V, solid from top to bottom. Blade Length: 3.0 in. Overall Length: 7.0 in. Blade Style Dagger Weight 4.0 oz. Sheath Leather Measure 2-5/8 X 6.2" approximate. This is haighly collectible piece, made from an idea as a one of one from the Master Knife Maker, Kansei Mitsuno.
	$999,999.99 0 available	Out of Stock
Item # 6534 Ray Rantanen Damascus and Mammoth Fixed Blade, NIB (A)
	This work of art features the Damascus with the Sunray Burst pattern of 224 layers, hammer forged. The blade is just over 4.75" and is configured as a straight point. The handle isa 4.75" and features Mammoth tooth (over 15,000 years old) with African Blackwood and rings of brass (the half guard of brass and the butt pommel is solid brass.) The sheath is hand fitted to a handmade sheath of leather that is hand sewn and oil dyed with a professional leather dye. This is a one of one and highly collectible piece.
	$999,999.99 0 available	Out of Stock
Item # 6533 ZICO Damascus Side Lock Fold Wharncliff Knife, (A) SOLD
	Fine SIDE LOCK folding knife handcrafted by the Italian knife-maker ZICO. Entirely made of damscus stainless steel. It features a lever based on the spine of the knife to release the blade form the locked opened and closed position. Totally hand made. It opens and closes very smoothly. It comes complete with its certificate and a python skin pouch. Excellent as a pocket knife, very thin it can be carried easily and safely. It measures 3 5/8” – 9,5 cm folded and 5 7/8” – 15 cm fully opened
	$999,999.99 0 available	Out of Stock
Item # 6532 George Cousino Custom Stubby Skinner, NIB (A)
	A Hand Made Custom Knife From George Cousino, a voting Guild member and Master kinife maker since 1983. George's knives are made one at a time in his shop, not laser cut or mass produced. The fit and finish of George's knives are second to none and has become his trademark. He prefers to use 440C Blades due to the high polish he applies and the Stainless 440C is exceptional steel for all around use.The guard is 416 Stainless as is the pommel.The Blade Is 3.1" Inches, 0.18 Thick, 7.4" Inch Overall Length. The handle is Stabilized Oak Burl Birch with African Blackwood Spacers. The knife's sheath is one of the finest custom made leather sheaths I have seen, custom fit to perfection. An Amazing Hand Made Custom Knife.
	$999,999.99 0 available	Out of Stock
Item # 6531 Ray Rantanen Custom 9.5
	This is an "old School" true blacksmith original with a double edged blade and serrations hand filed at the rear of the knife. Using a long Railroad Spike to make a knife is an art these days. After shaping and grinding, the blade is normalized then heated to a hardening temperature and quenched in quenching oil. The temper is achieved by applying heat to the back of the blade and letting the oxidation colors advance towards the cutting edge. At the first hint of yellow oxidation near the edge the blade is cooled in water. The result is a knife that is hard on the cutting edge and softer in the back and handle area. The cutting edge has tested at a Rockwell C scale hardness of 58 to 59 and the blade back and tang at 40. Specs are, Blade : 9.5 ", Handle mMaterial : Ironwood, Handlke length: 4" tapered, Butt of handle is a pommel that is shaped as a hammer head surface for all kinds of outdoor tasks. The size is 14.25" top to bottom with a hand made and sewn sheath custom fited to the knife and professional oil dye for leather is used. One fine piece of work!
	$999,999.99 0 available	Out of Stock
Item # 6530 Ray Rantanen Damascus Knife w/ Blesbok Handle, NIB
	This is an unusual gut hook knife where the handle features the finger relief curves on the top so you can get a better grip. The handle is very exotic Blesbok Antelope Horn from Africa with sold Brass half guard and butt cap. The blade is perfectly sized at 4.5 inches with an OAL of 9.25". The deeply etched 224 layer Damascus is used with a hammered edge for strength. An absolutely stunning filed knife for the hunter who has everything except a good knife. The sheat is hand fitted and sewn as well as colored with professional oil based dye.
	$999,999.99 0 available	Out of Stock
Item # 6529 Ray Rantanen Custom Damascus Filet/Carving Knife, NIB
	This is a 224 layer hammer forged Damascus Filet knife custom made to a length of 13.25" Overall length and a blade of 8.25 inches. The SunRay Damascus pattern and hammer edged 224 layer Damascus is second to none in strength. It make a great fishing knife or a surpise at the dinner table when carving a roast. The exotic handle is Gemsbok Antelope Horn and Ironwood. The half guard is solid brass as is the butt cap. I have never seen such a deeply etched Damascus pattern on a filet knife with a hammered edge of all 224 layers. A must jhave for the fisherman in the family or the cook in the kitchen. One of a kind custom, with fitted snap down sheath included, hand made and sewn.
	$999,999.99 0 available	Out of Stock
Item # 6528 Ray Rantanen Damascus w/Stainless & Elk Handles, NIB
	This is a 224 layer Damascus Rayburst pattern blade knife with a blade length of 4.5". The OAL is about 9" even. This is a full tang construction with a handle of black dyed elk antler. The back of the blade is completely hand file worked as well. The handle features a Stainless half guard and pommel end cap butt. It is a cutom ordered one of a kind piece. With the blacksmithing experience of the maker, the edge of the blade is hammered to a full 224 layer of Damascus making this an excellent pield knife. All of the sheaths are hand fitted to the knife and then hand sewn, colored with professional oil based leather dye. This is a knife made in one shop, A-Z by the maker who is also a blacksmith.
	$999,999.99 0 available	Out of Stock
Item # 6527 Ray Rantanen OOSIK and Mammoth Tooth Damascus., NIB
	This work of art features the Damascus with the Sunray Burst pattern of 224 layers, hammer forged. The blade is just over 4.5" and is configured as a straight point. The handle features Mammoth tooth (over15,000 years old) with Walrus Oosik (Walrus penile bone about 900 years old( with a half guard of brass amnd a solid brass butt pommel. The knife is fitted to a handmade sheath of leather that is hand sewn and oil dyed. This is a one of one and highly collectible.
	$999,999.99 0 available	Out of Stock
Item # 6526 Ray Rantanen Matrix Damascus Ivory, Fixed, NIB (A)
	The Damascus blade, hand filed on the top of the blade) of 4.25 inches has a beautiful rayburst pattern in this one of a kind piece. There are 224 layers of Damascus with a deeply etched pattern that is treated with an application of brass black after removal from the acid and rinse. The result is a contrast of silver and black. The blade is hammer shapoed on the cutting edge and hammer packed on the last heat forge. The result is a compreesion of 224 layers at hthe cutting edge! The three steels used are S-2. O-1 and 1020.The OAL is about 8.5". The handle has pieces of mamoth ivory in a black resin matrix and an insert of mammoth tooth surrounded by brass spacers. The guard and end butt are solid brass as well. This is a one of a kind knife with the sheath custom made to fit it. It is made of hand sewn and oil dyed leather. Truly a work of art!
	$999,999.99 0 available	Out of Stock
Item # 6525 Ray Rantanen Custom RR Spike Knife, NIB (A)
	This is a handmade fixed blade knife with a full tang. It was made from a high carbon 6" standard railroad spike and Ironwood handles. There are serrations on the top of the blade in the rear hand filed in front of the guard for controlled use. The dimesions are a 5.25" blade, 10" OAL and a palm swelled 4" handle before the solid spike pommel. This is a great all around knife based on the ease of resharpening in the field if needed. The sheath is hand sewn and dyed with professional oil based leather, custom fit to the knife and it protects the handle as well. I can't find a better custom knife for the money.
	$999,999.99 0 available	Out of Stock
Item # 6524 Duncan Custom Aftershock Flipper, with G-10 & CF Handle, NIB (A)
	This is a custom made Tactical Aftershock with a green G-10 inlay and a Carbon Fiber over Titanium Bolster handle that also has a Ti pocket clip with holes in it. The liner is anodized gold adding a very nice touch to it's custom Tactical features. BRAD DUNCAN AFTERSHOCK FLIPPER Folder. Aggressive Fighter Blade with a long false edge Top. Liner lock. CPM S30V Satin Finish Stainless Blade. Carbon Fiber Bolsters. Bearing Pivot for smooth effortless operation. OD green G-10 Scales. Gold Titanium liners. Stainless Screws and pivot. Polished Titanium backspacer posts. Bead Blast Titanium TIP DOWN pocket clip. The flipper also actsas the forward guard. Blade Length: 4" Overall Length: 9" Closed Length: 5" Blade Steel: CPM S30V Satin Finish Handle Material: CF & OD G-10 Bolster/Guard: Carbon fiber Weight: 6.0 ounces / 168 grams Warranty: The knives are guaranteed by the maker against flaws in the craftsmanship. Choice of pouch or Tactical sheath with knife.
	$999,999.99 0 available	Out of Stock
Page 1 page 2 page 3 page 4 Page 5 page 6 page 7 page 8 page 9 page 10 page 11