Custom Knives:

Production Knives:

What's New:

Shop by keyword or maker:

Item # 6330  Trident Custom VF Flipper Tanto
I always encourage clients to order what they want. In this case , a new item has been added to the lineup for 2008 from a customers order. This is the first Tanto Flipper made and a great finish was applied, the Gun Kote Mil Spec. The choice was made for a natural heat treated titanium handle with no overlay of camo and a solid color black blade. Hollow Ground Tanto Blade Steel: Blade Material: CPM S 30V. HRC 59-60. 0,20" Thickness Blade Coating: Gun Kote Handle Material: Hand Sculptured Titanium . 0.165" Thickness Ambidextrous/Dual Thumb Studs Pocket Clip with 2 mounting positions, pre-drilled holes. Oversized 0.25" Pivot Barrel Oversized 0.20" Stop Pin Locking Mechanism: 0,165" Titanium Frame Lock. Outstanding corrosion protection. Gun Kote will withstand a minimum of 500-hour salt spray tests at 5% salt, however, tests performed for Armscor by the South African Navel Logistics Dept. showed Gun Kote withstanding an equivalent of a 7-year exposure. (Tests were performed on Aluminum in a salt spray chamber with 50/50 on/off time at 35 degrees C.) SOLD, orders accepted for custom variations as well as shown. (smearing of grease is on the handle, please excuse the picture)

$525.00     0 available

Out of Stock

Item # 6327  Microtech HALO II, Satin P/E, NIB
This is a very solid blade lockup HALO, with no play at all on the blade when open. The drop point blade of the HALO 2, provide the preference of blade style with the reliability of the HALO series. Its one handed, fast action open, has fired its way into the hands of thousands of military, law enforcement and government agents all over the world. Smooth lines, lightweight, and a deadly edge, provide you with a little more than just backup. Highly functional knife with the improvements for hard use made. This is a NIB knife. H.A.L.O AUTOMATIC OPENING - OUT THE FRONT - PLUNGE LOCK ACTION: CONTINUOUS PROPULSION COMPRESSION SPRING BLADE: S30-V, .148” THICK, RC 58-59 BLADE LENGTH: 4.00” OVERALL LENGTH: 9.400” LENGTH CLOSED: 5.370” HANDLE: 6061-T6 ALUMINUM MIL-SPEC HARD COAT ANODIZE HANDLE THICKNESS: .420” WEIGHT: 4.5 OZ FULL LENGTH TACTICAL SHEATH INCLUDED FOR ANY TYPE OF CARRY POSITION IN THE BOX WITH ALL WARRRANTY PAPERS, NEVER USED OR CARRIED NEW KNIFE WITH CHARGING HANDLE DATED 06/2006. Please click the picture again to get an extreme closeup of this knife.

$369.00     0 available

Out of Stock

Item # 6326  Trident OB-01 Phantom Finish Fixed Blade, Custom Made
This is the one to hell and back knife that soldiers also use as a prybar and hammer. It is made to withstand the rigors of combat field use which may include anything to make do. Blade Material: CPM S30V Blade Thickness: 0.250"-0.265" 1/4+ of S30V Steel!!! Blade Length: 4.75"-5.75" Total Length: 10.25" Sheath: Custom Made Kydex with Teklock May be custom ordered with different finishes, blade length and handles. Prices vary on Mil Spec optional finishes. All knives come with lanyard loop holes and Certificates of Authenticity signed by Trident's maker and owner. Prices may vary based on Mil Spec finishes, blade length, blade finish and sheath. SOLD, accepting custom orders.

$375.00     0 available

Out of Stock

Item # 6323  Microtech Tactical Combat Troodon D/E P/S NIB
The Dual Action auto fire and retract OTF Combat Troodon was designed for a broad range of utility use and CQC. The Combat Tactical Troodon is also an ambidextrous knife with a reversible spring pocket clip as well to be used by lefty or righty users. The specs are OAL open: 9.10", with a tungsten tip glass breaker in the handle bottom. The D2 stainless steel blade is a double edge dagger type with partial serrations on both sides measuring at 3.75" approximate that is two tone black. The handle is contour sculpted from .004 to .435 with a closed size of 5.20" of Mil Spec hard anodized T6-6061 aluminum. This knife is NIB with a carry sheath and all paperwork in the box. Sold pending funds. Backup orders accepted.

$561.20     0 available

Out of Stock

Item # 6303  Trident VIS-01T 3D Ti Folder, Custom Made
Here is another first for Trident in the new 2008 lineup. A Tactical folder with a titanium 3D finshed framelock handle. VIS-01T TACTICAL TITANIUM 3D OAL 8.5" Blade 3.75" with dual Thumbstuds KG2401 Handle 4.9" with reversible Titanium pocket clip Heat Treatment Triple Tempered Finish 3D Titanium D/6AL4V Coating KG2401F MilSpec Black Titanium D/6ALK4V Hollow Ground Tanto Blade Steel: CPM S30V/CF2. Blade Material: CPM S 30V. HRC 59-60. 0,20" Thickness Blade Coating: KG/CF MIL-SPEC 3D finish Handle Material: Hand Sculptured Titanium . 0.165" Thickness Ambidextrous/Dual Thumb Studs Pocket Clip with 2 mounting positions, pre-drilled holes. Oversized 0.25" Pivot Barrel Oversized 0.20" Stop Pin Locking Mechanism: 0,165" Titanium Frame Lock. Outstanding corrosion protection. Gun Kote will withstand a minimum of 500-hour salt spray tests at 5% salt, however, tests performed for Armscor by the South African Navel Logistics Dept. SOLD, orders accepted.

$525.00     0 available

Out of Stock

Item # 6302  Trident OB-02 Modified Phantom, Custom Made...SOLD
This is a custom made 5" blade and tang of CPM S30V/CF2 stainless steel and G-10 handle. The blade and handle are shorter, with triple heat tempered blade needed for blade strength. The Phantom finish will stand up to the toughest enviroments. The Sheath is custom made as well to fit the knife snugly and is fitted with a Teklok for any number of mounting positions. Ceritificate of Authenticity is included. Prices will vary according to the finish and size as well as specs ordered. The3 OB-02 has a larger, wider blade than the OB-01 shown above. All knives are 1/4"+ in thickness. Unheard of these days in custom tactical knives priced this low. SOLD, custom orders accepted.

$375.00     0 available

Out of Stock

Item # 6301  Trident VF Flipper, Custom Made...SOLD
One of the newest stand outs from Trident is the new Bead Blast Aluminum Oxide coated S30V blade Flipper from Trident. The Triple Tempered heat treatment is an added cost that most makers won't do even though it strengthens the steel incredibly. Trident applies this extra step to all of their knives. The handle is GAL4V Mil Spec Titanium that is 3D covered camo Blade Length: 3.75" Length Open: 8.75". Blade Material: CPM S 30V. HRC 59-60. 0,20" Thickness Blade Coating: KG/CF MIL-SPEC 3D finish Handle Material: Hand Sculptured Titanium . 0.165" Thickness Ambidextrous/Dual Thumb Studs Pocket Clip with 2 mounting positions, pre-drilled holes. Oversized 0.25" Pivot Barrel Oversized 0.20" Stop Pin Locking Mechanism: 0,165" Titanium Frame Lock. Each knife comes with a signed Certificate of Authenticity. SOLD, temporarily out of stock. Orders accepted.

$525.00     0 available

Out of Stock

Item # 6300  Trident VIS-01T Spear Point Folder, Custom Made...SOLD
Orders are being accepted for the newest folder in the 2008 Trident Custom lineup is a Spear Point Titanium and S30V blade folder. The blade and handle are 3D finshed for camo prurposes and additional wear coating. Each knife is Triple Heat Tempered with a HRC of 59-60. Blade finish is 2402 3-D over a S30V tempered Spear Point Blade. Handle material is GAL4V Mil-Spec Titanium with a reversible clip and dual thumb studs for ambi use. All Tridents are custom made by hand and come with a Certificate of Authenticity. Blade Length: 3.75" Length Open: 8.75". Blade Material: CPM S 30V. HRC 59-60. 0,20" Thickness Blade Coating: KG/CF MIL-SPEC 3D finish Handle Material: Hand Sculptured Titanium . 0.165" Thickness Ambidextrous/Dual Thumb Studs Pocket Clip with 2 mounting positions, pre-drilled holes. Oversized 0.25" Pivot Barrel Oversized 0.20" Stop Pin Locking Mechanism: 0,165" Titanium Frame Lock. SOLD, temporarily out of stock. ORDERS ACCEPTED.

$525.00     0 available

Out of Stock

Item # 6290  Trident OB-02 Spearpoint OD S30V Fixed, Custom made...SOLD
New for 2008 is a Spear Point 3D Mil-Spec KG 2402 coated fixed blade Oberland 02 spear point. The dimensions are 4.85" blade, 3.75" G-10 handle, .75" pommel with lanyard loop hole. OAL is 9.0" with an extended tang and Blade Thickness: 0.250"-0.265" The color is 3D Mil Spec coated OD and comes with a Bolotron TekLok Digi Sheath for the perfect camo finish and wearability comfort in all positions. The OAL of this beauty is approx 9.0" of Triple Tempered S30V steel with an extended full tang. Signed Certificate of Authenticity for this custom made piece is included. These knives are in great demand and each one is custom made from scratch as is the Bolotron Teklok sheath. I consider this size to be the ideal all around tactical and field knife. SOLD, temporarily out of stock.

$375.00     0 available

Out of Stock

Item # 6289  Microtech Tool Kit
Original Microtech Tool Kit with the three proper fit tips in a self contained knurled carrier that is waterproof. This set has no issues, it is not the early kit that had rumors of improper heat treatment. It is brand new and never used, direct from Microtech. In fact, it was the last one available! SOLD

$999,999.99     0 available

Out of Stock

Item # 6286  Trident VF Flipper 3D S30V Titanium, Custom Made...SOLD
This is the newest design for the 2008 in the VF Flipper line. This is an OD 3D drop point blade of S30V steel coated with the proprietary finish. The Flipper allows a half guard when open and allows for ambidextrous opening by either of the flipper or thumb hole use. VF-Flipper TITANIUM FOLDER OAL 8.5" Blade 3.75" Triple Temper Heat Treatment HRC 59-60 Finish KG2401F blade Steel S30V/CF2 Heat treatment: Triple Temper Blade Material: CPM S 30V. HRC 59-60. 0,20" Thickness Blade Coating: KG/CF MIL-SPEC 3D finish Handle Material: Hand Sculptured Titanium . 0.165" Thickness Ambidextrous/Dual Thumb Studs Pocket Clip with 2 mounting positions, pre-drilled holes. Oversized 0.25" Pivot Barrel Oversized 0.20" Stop Pin Locking Mechanism: 0,165" Titanium Frame Lock Handle: 6AL4V Titanium. SOLD, custom orders accepted.

$525.00     0 available

Out of Stock

Item # 6283  Microtech HALO II Stonewash Blade
Hard to frind 2006 new HALO II with the wear and stain resistant stonewash blade that is great for everyday use. Discounted here at Finer cutlery although out of production. TACTICAL AUTOMATIC OPENING - OUT THE FRONT - PLUNGE LOCK ACTION: CONTINUOUS PROPULSION COMPRESSION SPRING BLADE: S30-V, .148” THICK, RC 58-59 BLADE LENGTH: 4.00” OVERALL LENGTH: 9.400” LENGTH CLOSED: 5.370” HANDLE: 6061-T6 ALUMINUM MIL-SPEC CLEAR HARD COAT ANODIZE HANDLE THICKNESS: .420” WEIGHT: 4.5 OZ With box and papers.

$999,999.99     0 available

Out of Stock

Item # 6279  Microtech Mini Socom Auto Tanto Blk Plain 04/99
This is a NIB Mini Socom with the original sleeve and plastic box with a sheath and lanyard loop. The tanto blade in plain edge black blade is certainly an extremely rare find in pristine condition from 1999. Original warranty cards included with other papers. OAl is 7.75" with a blade of just over 3" in 154CM steel. An absolute rare find for the collector, new all around with Finer Cutlery's money back guarantee. Time has absolutely stood still for this piece. Available and in stock.

$999,999.99     0 available

Out of Stock

Item # 6278  Microtech Kestrel-A 03/00 Tritium, NIB
This is an original Kestrel Auto in black with a partial serrated wharncliff blade and Tritium thumb stud. The date of this pristine knife is 03/2000 in it's original case and cover box, papers, warranty and sheath. This is a true collector's item, which I believe to be near impossible to find. The blade is a bit over 3" with an OAL of just over 7" and a pocket clip. All pictures may be clicked for extreme close ups of this knife. Money back guarantee is in effect as per Finer Cutlery's warranty. What you see and we say is what you get, or money back! Please click picture again for an extreme close up of details.

$999,999.99     0 available

Out of Stock

Item # 6277  Trident VF Titanium Flipper Solid Color, Custom...SOLD
This is the new 2008 VF Flipper featuring the solid coated blade and titanium OD handle. The flipper may be opened by the dual purpose half guard when closed by pushing down on the flipper and when opened it acts as a half guard explaining the oversisize. Blade is a drop point with dual holes for covert and quiet ambidextrous open. Dimensions and specs are: VF-Flipper TITANIUM FOLDER OAL 8.5" Blade 3.75" Triple Temper Heat Treatment HRC 59-60 Finish KG2401F blade Steel S30V/CF2 Heat treatment: Triple Temper Handle: 6AL4V Titanium SOLD! Orders are being accepted.

$525.00     0 available

Out of Stock

Item # 6274  Trident VIS-01T-TANTO 3D Titanium Handle
Here is another first for Trident in the new 2008 lineup. A Tactical folder with a titanium 3D finshed framelock handle. VIS-01T TACTICAL TITANIUM TANTO 3D OAL 8.5" Blade 3.75" with dual Thumbstuds KG2401 Handle 4.9" with reversible Titanium pocket clip Heat Treatment Triple Tempered Finish 3D Titanium D/6AL4V Coating KG2401F MilSpec Black Titanium D/6ALK4V Hollow Ground Tanto Blade Steel: CPM S30V/CF2. SOLD, ORDERS ACCEPTED.

$525.00     0 available

Out of Stock

Item # 6273  Trident TCFM-XL 3D Spearpoint
A new offering for 2008 is this spearpoint TCFM-02 with a 3d longer spearpoint fighter blade. All Trident fixed blades are .25"+ wide with full tangs. Specs and dimensions as follows: TCFM XL SPEAR POINT OAL 9" Blade 5.25" Ricasso .60 G-10 Handle 3.75" HRC 59-60 Finish 2401F MilSpec Black 3D Steel CPM S30V/CF2. ** SOLD, orders accepted for a 30 day delivery time.

$345.00     0 available

Out of Stock

Item # 6268  Trident OB-01 3D Titanium 2401 3D
This is a hell and back tactical field knife with a choice of Kydex Sheaths. Overal length is 10.5" with a 5.7" blade.Blade Material: CPM S30V Blade Thickness: 0.250"-0.265" Blade Length: 4.75"-5.75" Total Length: 10.25" Sheath: Custom Made Kydex with Teklock. Sold, temporarily out of stock.

$375.00     0 available

Out of Stock

Item # 6267  Trident ST-01 Dagger
This dagger was designed fora special military SEAL TEAM and is first sold here to civilians. OAL is 10.25" with a 6" blade, all in 2400 coated black S30V sttel and black G-10.Blade Material: CPM S30V Blade Thickness: 0.250"-0.265" Blade Length: 4.75"-5.75" Total Length: 10.25" Sheath: Custom Made Kydex with Teklok Pommel with full tang and lanyard loop. ** Sold, orders accepted. Delivery within 30 days.

$525.00     0 available

Out of Stock

Item # 6264  Trident VIS-O1T Tanto OD Solid Blade
This is the newest release of the all titanium handled and coated Trident folder for 2008. Specs for the VIS 01 T: Blade Length: 3.75" Length Open: 8.75: Blade Material: CPM S 30V. HRC 59-60. 0,20" Thickness Blade Coating: KG/CF MIL-SPEC 3D finish Handle Material: Hand Sculptured Titanium . 0.165" Thickness Ambidextrous/Dual Thumb Studs Pocket Clip with 2 mounting positions, pre-drilled holes. Oversized 0.25" Pivot Barrel Oversized 0.20" Stop Pin Locking Mechanism: 0,165" Titanium Frame Lock TRIPLE TEMPER HEAT TREATMENT WITH MIL-SPEC TITANIUM Certificate of Authenticity included. Hollow ground Tanto blade with thumb studs for ambidextrous use. KG2402 Finish on the S30V blade, OD 3D handle in titanium OD Green. SOLD, orders accepted.

$525.00     0 available

Out of Stock

page 1  page 2  page 3  page 4  page 5  page 6  page 7  page 8